IS THERE ANYONE OUT THERE WHO HAS HAD PROBLEMS WITH THE SLURRY DOOR????

 

I am experiencing problems with the slurry door on the rear discharge Marshall spreader. The seal on the bottom of the slurry door is shot to bits - machine is less than 6 months old!!!! This means when doing slurry it is a race against time as to how quick you can fill the spreader before it runs out the back of the spreader! Please can anyone let me know if they have had this problem, or even know some who has?????

the first problem i would say is.................................you bought a marshall

nothing wrong with marshall vesuvius better than some of the others with chains breaking or coming off the sprockets .    Going to rear door problem cut piece of metal length of door and 6inches wide then bolt it to bottom of door using bolt holes were rubber flap is,instead of rubber.  it does work . been done to ours at three mounths old and machine now 5yrs old.

nothing right with them, can say from first hand encounters and viewing the whole "marshall" experience, no engineering excellencenear them

only had expierience with their trailers and i recognise everyone should support british industry but they are rubbish, bad paint,build and design! sorry