in
Home » General Forums » Talking tackle » CASE CX100 - Won't Start after replacing clutch

CASE CX100 - Won't Start after replacing clutch

Last post Mon, Jul 6 2009 22:38 by dartmoor_hills. 5 replies.
Page 1 of 1 (6 items)
Sort Posts: Previous Next

  • Sat, Jul 4 2009 20:03

    • tobyb
    • Not Ranked
    • Joined on Sat, Jul 4 2009
      •

    CASE CX100 - Won't Start after replacing clutch

    Reply Contact
    Any ideas on how I can get the CASE CX 100 to start following a replacement of the clutch? It will start when wires are crossed at starter but not with the key. Just wondering if anyone has any ideas?
    Filed under: ,

  • Sat, Jul 4 2009 20:08 In reply to

    • jd 6820
    • Top 500 Contributor
      Male
    • Joined on Mon, Dec 22 2008
    • Thistleton, Lancashire
      •

    Re: CASE CX100 - Won't Start after replacing clutch

    Reply Contact

     Have you checked for broken wires to and from ignition switch/starter solenoid etc...

    I have not failed. I've just found 10,000 ways that won't work. (Thomas A. Eddison)

  • Sat, Jul 4 2009 20:49 In reply to

    • tobyb
    • Not Ranked
    • Joined on Sat, Jul 4 2009
      •

    Re: CASE CX100 - Won't Start after replacing clutch

    Reply Contact
    Sure have. Think it might be a master disconnect switch problem just having trouble locating it on this 1998 model. Never had a starting problem before.

  • Sun, Jul 5 2009 11:49 In reply to

    • jimc1390
    • Top 150 Contributor
      Male
    • Joined on Thu, Jun 12 2008
    • west cornwall
      •

    Re: CASE CX100 - Won't Start after replacing clutch

    Reply Contact

    just put a constant live through the wire from the ignition switch and start to trace it back through the tractor, i reckon seein as the tractor has been split its probably the multi connector plug, but also check silly things like the pto is not in gear( had me once)

    live it love it!!

  • Sun, Jul 5 2009 19:22 In reply to

    • avalon
    • Top 200 Contributor
    • Joined on Fri, Nov 21 2008
      •

    Re: CASE CX100 - Won't Start after replacing clutch

    Reply Contact

    May need to be reset after being split,or might be something fairly simple, safety swith ect.

  • Mon, Jul 6 2009 22:38 In reply to

    Re: CASE CX100 - Won't Start after replacing clutch

    Reply Contact

     

    Don't know if this is a lot of help but I used to have a cx100 and the electrics would get confused occasionally and think it was in gear and wouldn't start. It would start when I held the gear stick between neutral and in gear. Also if you go on the Case website and register it gives you access to all the parts diagrams which may be of help

     Heres the link; http://www.caseih.com/DWS/admin/cpc_login.asp?DealerID=PVA-9SYXB-Q2C3&DataSet=001CSIHE&LanguageID=ENU

Page 1 of 1 (6 items)
© RBI 2001-2010
Powered by Community Server (Commercial Edition), by Telligent Systems