Best known for its Zero-Till drills, John Dale has developed a smaller mounted unit to work in all conditions from ploughing to direct-drilling.

Cereals 2008 PICTURE GALLERY and FORUMS.

The All-Till is a 4m unit with a telescopic toolbar that brings it back down to 3m for transport.

Each coulter assembly carries five tine coulter and can swing from left to right to accommodate uneven contours.

John Dale 4m All-Till Drill

Rubber press-wheels run alongside each outlet to pull trash away should any begin to build up.

With a 1.2t hopper and Accord metering system the All-Till costs £21,000 but needs just 100hp up front.