Following on from the static introduction at LAMMA and Cereals earlier this year, Tillage-Live offers the first opportunity to see the new Cayron plough in the ground.

Two versions will be available – the Cayron 200, with a stepped furrow width adjustable or the Cayron 200 V which is equipped, as standard, with hydraulic furrow width adjustment.

See also: All the Tillage-Live news

The unit at Tillage-Live will be the Cayron 200 V. A simple hydraulic system provides an easy set-up of the front furrow width, the pulling angle and working width via three interlinked hydraulic rams. Hydraulic adjustment of the front furrow width comes as standard on both models.

http://www.fwi.co.uk/events/Tillage-live/

The body to body clearance of 100 cm, in combination with a beam height of 83 cm and the smooth surface of the over-dimensioned main beam, guarantees maximum passage. Both models are equipped with a double-action shear bolt protection sys-tem against damage.

The headstock is equipped with a sprung, one-piece sprung cross shaft which provides a very good damping function and so clearly reduces the strain on the turnover linkage. The turnover mechanism is designed around a 130 mm diameter hollow shaft and equipped with two equally large, high-quality, robust taper roller bearings.