BVL Bale Strip
Removing bale wrap and net is one of the more tedious winter jobs, but the BVL Bale Strip does the job for you.
The operator picks up a bale on the two forks, while a hydraulic grab at the top takes hold of both bale and net.
When the bale is lifted to the feeder, another knife fitted to the side of the wagon cuts the bottom of the bale.
The operator then opens the forks, allowing the bale to fall into the feeder, with the hydraulic grab holding the net and wrap.
It can be fitted to any loader and the knife block can go wherever it is going to be used most.