Kuhn adds new features to revamped Axis fert spreader range
A Kuhn Axis 25 equipped with the Telimat X border spreading deflector © Kuhn Precision spreading technology from Kuhn’s larger models has filtered down to smaller sizes in its revamped Axis range.
Features such as a weighing system for streamlined calibration and more sophisticated flow metering control are now available for Axis 25 models with 1,500- to 3,500-litre capacities.
The choice of variants within the mid-range Axis 20.2 and 30.2 series has been whittled down, but the range-topping Axis 50.2 options continue unchanged.
Kuhn’s Axis 25 D is the entry-level machine, featuring manual control and the VariSpread 2 hopper shutter control system, allowing independent left- and right-hand shut-off to reduce overlaps.Â
See also: Versatile boom spreader does four jobs for Norfolk farm
The Axis 25 V and M-EMC models, meanwhile, gain isobus electronics so that the spreaders can be controlled using a compatible touchscreen terminal, along with VariSpread 18-section control for progressive working width reduction and expansion where adjoining passes converge and diverge.
They also have hopper shutters operated by servo motors rather than hydraulic cylinders to ensure a quick response to ground speed or rate changes, and there is a choice of three disc designs to suit different materials and preferred spreading widths – including urea and potash up to 36m.
At the top of the Axis 25 model list, the M-EMC version does without weighing in favour of dynamic flow control adjustment based on torque readings from each of the two spinner disc drive shafts.
This well-established system is designed to maintain accuracy across the full working width, especially when applying inconsistent bulk fertiliser, and allows different rates to be applied either side as part of a variable-rate approach with no calibration needed.
A 31% larger outlet in each half of the hopper enables application rates of up to 675kg/min and the spreaders also have Kuhn’s 21cm eight-spoke agitator, which runs at just 17rpm to keep the material flowing without damaging it.
New border-spreading deflectors are introduced, too – Telimat X with settings that provide full application rate up to the field border and a curtailed pattern to avoid throwing granules into hedgerows, and the GSE X version for applications to high-value crops grown in beds.
